|
| Milwaukee 6540-1 2.4-Volt 190 RPM Screwdriver with Battery and Charger Kit | |||||||
 |
| ||||||
| Milwaukee 6540-1 2.4-Volt 190 RPM Screwdriver with Battery and Charger Kit From Amazon (US) for |
Milwaukee 6540-1 2.4-Volt 190 RPM Screwdriver with Battery a (Rating: 5.00) Review : Fantastic tool for the truck or auto tech,this is definetly a case were less is better, reffering to the voltage of the unit.It is very compact yet has a nice balance between power and it's ability to get into very tight spaces.The driver is very well constructed, so is the charger ,all of which are produced in Japan,which means you are getting quality.The package also includes a jabobs chuck and chuck key, 2 batteries, a high impact carrying case and some assortyed bits.Add a good bit selection for some real versatility .From the use I have had so far I can tell you the batteries are long lasting and the unit has been trouble free.I would recommend the offset as an assesory,it comes in very handy.Don't let the lower voltage fool you,this is a very effective tool.If your looking for a more powerful unit look to the Dewalt driver, but is is not as nearly as compact ,the price paid for more power.I personally have both of the drivers and each has it's place.This is a killer package from Milwaukee, and a must have addition to your tool chest,you will not be sorry with your choice. A Tool I Can Count On (Rating: 5.00) Review : For more than ten years this tool has never failed to function perfectly. I like the forward and reverse rocker switch. When used by a "lefty" the switch is easily operated by the index finger. For right hand operation the thumb is used. Another great feature is the lock switch which prevents the tool from accidentially being turned on. For example, if you want to snug up a screw by hand you can lock the switch off. Locking the tool before placing it in your tool box prevents accidential turn on while in storage. The battery removes easily and seems to always run longer than I expect it would. Of course, in ten years I have replaced them from time to time. The adjustable torque is a great feature too. It's a great tool for electrical work, electronic equipment repair, and working on door locks, etc. I have not missed variable speed since a quick on/off works well. I often underestimate its power. The two speed model might be worth checking on if you want to drill with it. My two single speed units give me good control. These tools have seen a lot of service and I have never regretted the purchases! Best screwdriver for Computers (Rating: 5.00) Review : This is the best screw driver I have ever used for working on computers. With the clutch set at 1 I can drive screws in any computer component with out fear of over tightening. I have been using this screw driver for 7 years now on all things computer related and have absolutely no complaints. I have even driven screws into plastic with out stripping them. The two speed setting is great most of the time I leave it in high with the clutch on one and don't think about it. There are the times with the occasional sticky screw where you might need to turn the clutch up and set the speed to low but the screw driver has the ability to do that with in easy reach of your thumb. The rocker switch between forward and reverse makes it easy to take the screw back out that you just mistakenly put in. I can't think of a more essential tool for working on computers that this screw driver |
| Nothing available in this section |
  |
| Milwaukee 6540-1 2.4-Volt 190 RPM Screwdriver with Battery and Charger Kit | |||||||
|
| ||||||
| Home | About | Bookmark ShopExt - CTRL+D |