|
| Quick-Grip Quick Change 518QC 18" Bar Clamp/Spreader | |||||||
 |
| ||||||
| Quick-Grip Quick Change 518QC 18" Bar Clamp/Spreader From Amazon (US) for $22.99 |
Mate the size to your work needs, but all of them are great (Rating: 5.00) Review : The big benefit to these is that you get true mobility out of them. While holding a piece of work, lined up, in one hand, you use these quick grips in the other hand to secure the work. If it slips while clamping, it is still a one handed tool to release it, and reclamp it again. Enables you to maintain a professional flow to your work. I feel awkward when using regular clamps in comparison. They require two hands. You could use a spring clamp to hold it together, then get another clamp to give it a final hold, but the quick grip saves you from having to do that. Having these clamps in a few different sizes is beneficial as well. Small ones are more frequently used, and don't get in the way. The 33 1/2" is great when you need to hold larger projects together, and you can't effectively use two smaller ones to substitute. Additionally the macro clamps give you deeper jaws for a farther reach, enabling you to use them for securing work, to your radial arm saw table for example. They are fast enough to be used for almost any application. Sometimes I use them to secure work when sanding with a power sander. A couple squeezes and they are on, and one squeeze and they pop off. After getting the smaller ones, and using them, I immediately order two of the 33 1/2" for larger projects, and for tie downs on equipment, including the drill press, and occasionally the radial arm saw. Their is a small rubber stopper, which you can readily remove, in order to reverse the end, and make it a spreader as well. Something not needed very often, but difficult to achieve without one of these. One note is that these have built in rubber pads, that completely cover the metal internal end. That is an advantage when you do not want to mar the wood. That and the fact that you can squeeze these with one hand, creates a mechanism that is easy to use, but not something that you would want to use for strength clamping. As a safety measure, these clamp sufficiently for most operations, but a threaded bar clamp, is stronger. So for those operations where extreme strength is needed, these are not the clamps to use. You sacrifice mountain holding strength for the ease of use. For example if I was using a large bit on the drill press, and drilling into metal, I would clamp it with something more. Even the slightest movement in an operation like that, could cause a snag, sending the piece into movement. If you are using just one of them, at the end of a 24" board, and decide to rout the other end, it will move on you. Securing it with two of them, and it is super tied down. You get my drift. The big advantage of quick grip clamps, is that they handle wood beautifully, even for glue up operations. Hold workpieces more than securely to do the job in most applications, and are so handy that they deserve more than 5 stars. I would feel lost without them. It is another tool in the must have category. Convenient, yes...Worth the hype...No Way (Rating: 3.00) Review : These clamps are easy to use. The adjust with one hand. They don't mar the wood. But they lack the clamping power of j-clamps or c-clamps. I have about 6 of them and they're great for holding a piece of wood to the workbench for routing or sanding, but that's about it. Don't even try using them for glue-ups. Good Clamp, Good Size (Rating: 4.00) Review : This clamp uses the ingenius trigger grip design for unbelievable ease of use. This makes the clamp unbelievably easy to tighten using one hand. A few warnings about this particular product, however: (1) Be sure the size is correct. I think the 18" size is the best all-around size. But, if you are doing very large projects, the 36" size may be better. (2) The plastic construction makes the clamps best for holding items "approximately" in place. If you need total clamping for cutting precision, look elsewhere. All in all, a good product if it is the right size, and used for the right purpose. |
  |
| Quick-Grip Quick Change 518QC 18" Bar Clamp/Spreader | |||||||
|
| ||||||
| Home | About | Bookmark ShopExt - CTRL+D |